Skip to Content
Bath Fans
How do I install the InVent Series Clean Cover grille?
or
Click on our step-by-step guide below!
1
View of Grille with Grille Springs as placed during shipping
(LED Module may or may not be included)
2
Gently remove Grille Spring
3
Grasp end hooks
4
Rotate hooks up and out
Towards edge of the grille
5
When rotated the correct direction for Grille Springs shown
"Feet" of Grille Springs should be facing away from each other
6
Insert Grille Springs into the large black slots in the housing
7
The Grille Springs only need to be within the black plastic slots
8
Once Grille Springs are within slots, release
Tension of the springs will draw Grille to ceiling